Pet Bottle Mould Blow Molding Machine Daily Maintenance Method

During the Second World War, the blow molding process began to be used for the production of bottles. In the late 1950s, with the development of high-density polyethylene and blow molding machines, blow molding technology was widely used. The volume of hollow containers is up to several thousand liters and production is now controlled by computers. Suitable for blow molding plastic polyethylene, polyvinyl chloride, polypropylene, polyester, hollow containers are widely used as industrial packaging containers, according to the method of manufacturing preforms, blow molding can be divided into extrusion blow molding and injection blow molding, The newly developed multi-layer blow molding and stretch blow molding, and then the blow molding machine also began its journey. Blowing machines are now more and more popular, but many manufacturers don’t pay attention to its maintenance and maintenance. Here is the maintenance and maintenance of the pet bottle mold blowing machine:
1 Before the shift of the Pet blow molding machine, it is necessary to add smoothing oil to various active parts. (manipulator, robot, track clamping track)
2 swing arms per day (3 – 4). The heater chain and small chain can be used once a month. Always look at the main unit reducer, the heating deceleration opportunity is lack of oil. The main bearing can be (3–2) plus one month.
3 Check whether the moving parts can be firm before consumption, and the loose screws, especially the strong impact of the center, are the same as the local belt drive.
4 Check whether the high pressure gas source, low pressure gas source, power supply, and water supply are normal.
5 Check whether the maintenance and installation of the emergency stop switch, safety door switch and detection switch are normal.
6 view warming head into the embryo, part of the work out of the embryo can be carried out normally. If the embryo is not in place, insert the embryo to adjust the pressure of the embryo to install the nut.
7 Check if the lamp is damaged or broken. It should be replaced in time.
8 Check if the pneumatic components can leak and whether the initiative is flexible.
Jilian Plastic Mould is a Chinese mold manufacturer serving customers all over the world. We offer a wide range of blow molding machine equipment and pet preform molds. If you purchase our 5-gallon Pet Preform, we will provide you with follow-up maintenance to ensure that you can use our equipment for a long time.

コメントを残す

メールアドレスが公開されることはありません。 * が付いている欄は必須項目です

次のHTML タグと属性が使えます: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>